Frequently Asked Questions

Windshield replacement at Stop’N Go Auto Industries in Laredo starts at $100 for most vehicles, with the final price set by your vehicle’s year, make, model, and body style. Vehicles with rain sensors, lane-departure cameras, or heated glass run higher because they require specialty OEM-grade glass and ADAS calibration. Same-day quotes are available — call (956) 441-1298 with your VIN.

Windshield chip repair at Stop’N Go Auto Industries is $100 for the first chip and $50 for each additional chip on the same windshield. Repairs take about 30 minutes and most insurance carriers waive the deductible, meaning you usually pay $0 out of pocket. Repair while it’s still a chip — waiting until it cracks turns a $100 repair into a full replacement.

ADAS calibration at Stop’N Go Auto Industries is $175 as a standalone service. When you replace your windshield with us, ADAS calibration is included at no extra charge. Module coding (a separate procedure required for some 2018-and-newer vehicles) is $400.

Window tinting at Stop’N Go Auto Industries starts at $100 for two front windows and scales by film grade (standard dyed, ceramic, or premium ceramic), vehicle size, and coverage. Shade choice — 35%, 25%, 15%, or 5% VLT — does not affect the price; only film grade and coverage do. Texas law requires 25% minimum VLT on front side windows, so darker shades are only legal on rear windows.

Paint protection film packages at Stop’N Go Auto Industries start at $500 for a basic clear bra, $1,000 for partial front, $2,000 for full front, and $7,000–$7,500 for full-vehicle coverage. À-la-carte zones run $100–$600 each — mirror backs $100, headlight protection $200, rocker panels $600. All PPF is professionally installed with self-healing film rated for South Texas heat.

Yes — if you carry comprehensive coverage, your insurance covers windshield repair and replacement in Texas, and many policies waive your deductible for chip repair entirely. Stop’N Go Auto Industries directly bills State Farm, GEICO, Progressive, Allstate, USAA, and all other major carriers through the Safelite Solutions Network. You don’t pay upfront — we file the claim and bill the carrier.

In Texas, comprehensive coverage often pays 100% of windshield replacement after your deductible. Many policies — especially common in South Texas and Laredo — carry $0 glass-comprehensive deductibles, meaning your out-of-pocket cost is $0. Stop’N Go Auto Industries verifies your benefits during the quote so you know exactly what (if anything) you’ll owe.

Yes — Texas insurance law gives you the right to choose any qualified auto glass shop, regardless of who your carrier “recommends.” Stop’N Go Auto Industries is an authorized shop in the Safelite Solutions Network, so you can request us by name when filing your claim. Tell your insurance: “I want Stop’N Go Auto Industries in Laredo as my shop of choice.

Yes — Stop’N Go Auto Industries files your auto glass insurance claim directly with State Farm, GEICO, Progressive, Allstate, USAA, and all major carriers. We verify your coverage, submit the claim, and bill the carrier — you don’t deal with the paperwork. Most claims are approved and scheduled the same day you call.

Stop’N Go Auto Industries direct-bills all major U.S. auto insurance carriers including State Farm, GEICO, Progressive, Allstate, USAA, Liberty Mutual, Nationwide, Farmers, and Travelers through the Safelite Solutions Network. Virtually every carrier is on the network. We file the claim and bill them directly — no upfront payment from you.

Most windshield replacements at Stop’N Go Auto Industries take 45–60 minutes from start to finish. After installation, the urethane adhesive needs 30–45 minutes of cure time before the vehicle is safe to drive. Total in-and-out time for most customers is 90 minutes or less.

Yes — Stop’N Go Auto Industries provides mobile auto glass service throughout Laredo and surrounding South Texas. Our fully equipped mobile units come to your home, office, or roadside location and perform the full repair or replacement on-site. Call (956) 441-1298 to schedule mobile service.

Cracks shorter than 6 inches and not in the driver’s direct line of sight can typically be repaired rather than replaced — repair takes 30 minutes and costs around $100. Cracks longer than 6 inches, cracks in the driver’s sight line, or damage that reaches the edge of the glass require full replacement for safety. Stop’N Go Auto Industries inspects every chip and crack before quoting so you only pay for the work needed.

Yes — Stop’N Go Auto Industries replaces all auto glass: windshields, door glass (driver and passenger), quarter glass, rear (back) glass, vent glass, and sunroofs. We also repair and replace window regulators (the motor and track that raise and lower your windows). Bring any year, make, or model — we handle every vehicle on the road.

Yes — Stop’N Go Auto Industries replaces windshields on pickup trucks, semi-trucks (Class 8), box trucks, RVs, and commercial fleet vehicles. We stock or source the correct OEM-grade glass for heavy-duty applications and can perform service at your yard for fleet accounts. Fleet pricing and PO terms are available for accounts running 3+ vehicles — call (956) 441-1298 to set up a fleet account.

ADAS (Advanced Driver Assistance Systems) calibration is the process of realigning your vehicle’s forward-facing cameras and sensors so features like lane-departure warning, automatic emergency braking, and adaptive cruise control function correctly. Calibration is required any time your windshield is replaced on a 2017-or-newer vehicle equipped with these systems. Driving without calibration after a windshield replacement can disable safety features or cause them to misfire.

Yes — ADAS calibration is included at no extra charge when you replace your windshield at Stop’N Go Auto Industries. As a standalone service (for example, after a collision repair), ADAS calibration is $175. Both static and dynamic calibrations are performed in-house.

Stop’N Go Auto Industries performs both static and dynamic ADAS calibration in-house — your vehicle’s specifications determine which is required. Static calibration uses precision targets in a controlled environment (our shop bay). Dynamic calibration is performed with on-road driving following manufacturer protocols. Both are $175 standalone or included with windshield replacement.

Module coding is a separate procedure from ADAS calibration — it programs the vehicle’s electronic control modules to recognize new or replacement parts (cameras, sensors, body modules). Some 2018-or-newer vehicles require module coding in addition to calibration after windshield replacement. Stop’N Go Auto Industries performs module coding for $400 when your vehicle requires it.

Most 2017-or-newer vehicles with forward-facing cameras mounted to the windshield require ADAS calibration after replacement — this includes nearly every Honda, Toyota, Subaru, Mazda, Hyundai, Kia, Ford, Chevy, RAM, GMC, Volkswagen, Audi, BMW, and Tesla built since then. If your vehicle has lane-departure warning, lane-keep assist, automatic emergency braking, or adaptive cruise, it almost certainly needs calibration. Stop’N Go Auto Industries verifies calibration requirements during the quote.

Texas law requires 25% minimum VLT (Visible Light Transmittance) on front side windows — so the darkest legal tint on the driver and front passenger windows is 25%. Rear side windows and back glass have no minimum VLT and can be tinted as dark as 5% (limo tint). Stop’N Go Auto Industries installs all four standard shades (35%, 25%, 15%, 5%) across three film grades and explains the legal limits before installation.

Dyed tint is the entry-level option — it darkens windows but has limited heat rejection and can fade over time. Ceramic tint adds infrared-blocking technology for significantly more heat rejection and longer life. Premium ceramic offers the highest heat rejection, the best UV protection, and a lifetime manufacturer warranty. Stop’N Go Auto Industries offers all three grades; price depends on grade and coverage, not on shade.

Quality paint protection film, professionally installed, lasts 7–10 years and carries a manufacturer warranty against yellowing, cracking, and delamination. The self-healing top coat repairs minor scratches and swirl marks with heat (sun, warm water, or a heat gun). Stop’N Go Auto Industries installs PPF rated for South Texas heat and UV, so longevity isn’t compromised by Laredo’s climate.

Ceramic coating is a liquid polymer that chemically bonds to your vehicle’s paint, creating a hard, hydrophobic, UV-resistant layer that lasts years instead of weeks like wax. Wax sits on top of the paint and washes off within 1–3 months. Ceramic coating at Stop’N Go Auto Industries is $350 for full-vehicle application and includes a 1-year warranty.

Headlight restoration at Stop’N Go Auto Industries is $150 per pair and takes about 60 minutes. Properly restored headlights stay clear for 1–3 years depending on sun exposure and parking conditions. Results vary by how oxidized the headlight is — heavily yellowed or pitted housings may need replacement rather than restoration; we tell you upfront which is the better option.

Yes — Stop’N Go Auto Industries is fully bilingual. Our front-desk team and technicians speak Spanish, and our AI assistant Maria answers calls and chat messages in Spanish 24/7. Para servicio en español, llame al (956) 441-1298 o chatee con Maria en stopngoautoglass.com.

Stop’N Go Auto Industries is open Monday through Friday from 8:00 AM to 5:00 PM Central. We are closed Saturday and Sunday, and closed on Christmas Day, Thanksgiving, New Year’s Day, and July 4th. After-hours quotes and bookings are handled 24/7 by our AI assistant Maria at stopngoautoglass.com or (956) 441-1298.

Yes — Stop’N Go Auto Industries offers 24/7 quotes through Maria, our bilingual AI assistant, available on stopngoautoglass.com and at (956) 441-1298. Maria captures your vehicle details, quotes your service, books your appointment, and routes insurance claims — even at 2 AM on a Sunday. A human team member confirms your appointment the next business morning.

Stop’N Go Auto Industries is located at 6019 McPherson Rd, Suite #12, Laredo, TX 78041, in the McPherson Rd / Mall del Norte corridor. Hours are Monday–Friday 8 AM – 5 PM Central. We also provide mobile service throughout Laredo, Webb County, and surrounding South Texas, and accept service requests across the state via subcontractor partners.

Yes — Stop’N Go Auto Industries accepts service requests across Texas, including Eagle Pass, Del Rio, San Antonio, Austin, Houston, and Dallas. Local Laredo and South Texas jobs are handled by our own technicians; jobs outside our 25-mile mobile radius are routed to vetted subcontractor partners working under Stop’N Go’s quality standards. Call (956) 441-1298 or request a quote at stopngoautoglass.com.

El reemplazo de parabrisas en Stop’N Go Auto Industries en Laredo comienza desde $100 para la mayoría de vehículos, y el precio final depende del año, marca, modelo y estilo de su vehículo. Vehículos con sensores de lluvia, cámaras de asistencia al conductor o vidrio con calefacción cuestan más porque requieren vidrio OEM especializado y calibración ADAS. Cotización el mismo día — llame al (956) 441-1298 con su VIN.

La reparación de piedrada (chip) en Stop’N Go Auto Industries es $100 por la primera piedrada y $50 por cada piedrada adicional en el mismo parabrisas. La reparación tarda 30 minutos y la mayoría de aseguranzas eliminan el deducible, así que generalmente usted no paga nada. Repare mientras todavía es una piedrada — esperar a que se vuelva cuarteadura convierte una reparación de $100 en un reemplazo completo.

Sí — si tiene cobertura comprehensiva, su aseguranza cubre la reparación y el reemplazo del parabrisas en Texas, y muchas pólizas eliminan el deducible para reparaciones de piedradas. Stop’N Go Auto Industries factura directamente a State Farm, GEICO, Progressive, Allstate, USAA y todas las aseguranzas principales mediante la Red Safelite Solutions. Usted no paga por adelantado — nosotros presentamos el reclamo y le facturamos a la aseguranza.

La mayoría de los reemplazos de parabrisas en Stop’N Go Auto Industries toman entre 45 y 60 minutos de principio a fin. Después de la instalación, el adhesivo de uretano necesita 30 a 45 minutos de tiempo de curado antes de que el vehículo pueda manejarse con seguridad. El tiempo total de entrada y salida para la mayoría de los clientes es de 90 minutos o menos.

Sí — Stop’N Go Auto Industries ofrece servicio móvil de vidrio automotriz en todo Laredo y el sur de Texas. Nuestras unidades móviles completamente equipadas llegan a su casa, oficina o a la orilla de la carretera y realizan la reparación o reemplazo completo en el lugar. Llame al (956) 441-1298 para programar servicio móvil.

La ley de Texas requiere un mínimo de 25% VLT en las ventanas delanteras laterales — así que el tinte más oscuro legal en las ventanas del conductor y del pasajero delantero es 25%. Las ventanas traseras laterales y el vidrio trasero no tienen mínimo de VLT y pueden tintarse hasta 5% (tinte de limusina). Stop’N Go Auto Industries instala las cuatro tonalidades estándar (35%, 25%, 15%, 5%) en tres grados de película y explica los límites legales antes de la instalación.

Sí — Stop’N Go Auto Industries ofrece cotizaciones 24/7 a través de Maria, nuestra asistente de inteligencia artificial bilingüe, disponible en stopngoautoglass.com y al (956) 441-1298. Maria captura los datos de su vehículo, cotiza su servicio, agenda su cita y procesa reclamos de aseguranza — aunque sean las 2 AM de un domingo. Un miembro del equipo humano confirma su cita la siguiente mañana hábil.

Stop’N Go Auto Industries está ubicado en 6019 McPherson Rd, Suite #12, Laredo, TX 78041, en el corredor de McPherson Rd / Mall del Norte. Horario: lunes a viernes de 8 AM a 5 PM Central. También ofrecemos servicio móvil en todo Laredo, el condado de Webb y el sur de Texas, y aceptamos solicitudes de servicio en todo el estado mediante nuestros socios subcontratistas.